Hi Wayne,
We purchased a CMC unit from you back in August 2012 to carry our echo sounding equipment between the hulls of our trailer-able Noosa Cat survey vessel, in an attempt to reduce the lifting effort when it was mounted over the side of the vessel as we had to…
Well its all done.
The install went smoothly, just had to muck around a lot to get the motor off the transom, there was a lot of silicone and the motor probably…
Hi Wayne.
I have fitted my CMC unit and I am very happy with it.
I have put 1 switch on the console and another on the outboard motor, that way I can operate…
The PL-65 will handle upto to 300 HP no problem.
We have many ski boats fitted with this strong alloy Jack Plate over the last 7 years. Many are used for…
Zig has CMC PT-35 with a 30 hp Merc fitted to his tinnie.
He fitted the up down switch to the seat.
That makes it…
There are so many types of boat and motor combinations that the PT-35 will fit.
Common sense is a great guide.
Warren has a Quintrex with quite a…
Hi Wayne
Here are some pictures as promised.
Very happy with the CMC PT-35, at 68 finding it a bit of a strain lifting the motor up because…
Rohan and Jess have their boat in the Northern Territory.
They recently fitted a manual Jack Plate ML-65.
They write….
Hi Wayne, yes the plate turned up last Monday.
It’s on and looks good.
We took it to Manton Dam for a test run on…
Darryl is in Townsville.
He needed some help to lift the Yammie 40 as he came to shore.
Darryl fitted the PT-130 using the owners manual that comes with each unit.
Its an…
Recently went looking for power T&T for my 30 hp yamaha. Age and the back meant the manual tilt was becoming a trial.
Finished up buying the CMC PT35 from Wayne @Caboolture delivered to my door in Newcastle 3 days later…