We purchased a CMC unit from you back in August 2012 to carry our echo sounding equipment between the hulls of our trailer-able Noosa Cat survey vessel, in an attempt to reduce the lifting effort when it was mounted over the side of the vessel as we had to…
https://www.cmcsales.com.au/wp-content/uploads/2012/12/HS11.jpg7681024Wayne Kennedyhttps://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.pngWayne Kennedy2012-12-06 12:03:492024-04-24 05:14:20PT-35. Special use on Catamaran for HydroSurvey Australia
https://www.cmcsales.com.au/wp-content/uploads/2012/12/After-e1547241171342.jpg10001500Wayne Kennedyhttps://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.pngWayne Kennedy2012-12-06 01:25:102019-01-10 08:03:19Nathan has a CMC PT-130 Trim and Tilt fitted to an older Evinrude 50
https://www.cmcsales.com.au/wp-content/uploads/2013/02/P1010031.jpg480640Wayne Kennedyhttps://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.pngWayne Kennedy2012-12-06 01:13:162019-01-10 08:17:41John fitted a CMC PT-35 to his 30hp Mercury
https://www.cmcsales.com.au/wp-content/uploads/2013/02/jacking-plate007-e1547241268337.jpg11251500Wayne Kennedyhttps://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.pngWayne Kennedy2012-12-06 00:24:392019-01-31 19:04:58PL-65 Hydraulic Plate on 250 hp Saltwater Merc with Hydraulic steering
https://www.cmcsales.com.au/wp-content/uploads/2013/02/zig1.jpg480640Wayne Kennedyhttps://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.pngWayne Kennedy2012-12-06 00:16:382019-01-10 08:27:10Zig fits a CMC PT-35 to his 30 Merc
https://www.cmcsales.com.au/wp-content/uploads/2013/05/warren-09.jpg480640Wayne Kennedyhttps://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.pngWayne Kennedy2012-12-06 00:09:412019-01-10 08:31:02Warren adds a PT-35 to his 3.9 Quintrex and Honda 30
https://www.cmcsales.com.au/wp-content/uploads/2012/12/keith1.jpg480640Wayne Kennedyhttps://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.pngWayne Kennedy2012-12-05 23:58:522019-01-10 08:37:09Keith fits a CMC PT-35 to his little Yamaha and solves a problem
https://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.png100152Wayne Kennedyhttps://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.pngWayne Kennedy2012-12-05 23:43:302024-05-17 12:08:42Rohan and Jess fit a Manual Jack Plate to their ski boat
https://www.cmcsales.com.au/wp-content/uploads/2012/12/Darryl-PT130-40hp-Yamaha-e1547241203852.jpg10601500Wayne Kennedyhttps://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.pngWayne Kennedy2012-12-05 23:39:062019-01-10 08:43:05Darryl fitted a CMC PT-130 to lift his Yamaha 40
https://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.png100152Wayne Kennedyhttps://www.cmcsales.com.au/wp-content/uploads/2019/01/logo.pngWayne Kennedy2012-12-05 23:19:122019-01-10 08:47:06Tim fits PT-35 and answers a few questions about outboard height
PT-35. Special use on Catamaran for HydroSurvey Australia
Hi Wayne,
We purchased a CMC unit from you back in August 2012 to carry our echo sounding equipment between the hulls of our trailer-able Noosa Cat survey vessel, in an attempt to reduce the lifting effort when it was mounted over the side of the vessel as we had to…
Nathan has a CMC PT-130 Trim and Tilt fitted to an older Evinrude 50
Well its all done.
The install went smoothly, just had to muck around a lot to get the motor off the transom, there was a lot of silicone and the motor probably…
John fitted a CMC PT-35 to his 30hp Mercury
Hi Wayne.
I have fitted my CMC unit and I am very happy with it.
I have put 1 switch on the console and another on the outboard motor, that way I can operate…
PL-65 Hydraulic Plate on 250 hp Saltwater Merc with Hydraulic steering
The PL-65 will handle upto to 300 HP no problem.
We have many ski boats fitted with this strong alloy Jack Plate over the last 7 years. Many are used for…
Zig fits a CMC PT-35 to his 30 Merc
Zig has CMC PT-35 with a 30 hp Merc fitted to his tinnie.
He fitted the up down switch to the seat.
That makes it…
Warren adds a PT-35 to his 3.9 Quintrex and Honda 30
There are so many types of boat and motor combinations that the PT-35 will fit.
Common sense is a great guide.
Warren has a Quintrex with quite a…
Keith fits a CMC PT-35 to his little Yamaha and solves a problem
Hi Wayne
Here are some pictures as promised.
Very happy with the CMC PT-35, at 68 finding it a bit of a strain lifting the motor up because…
Rohan and Jess fit a Manual Jack Plate to their ski boat
Rohan and Jess have their boat in the Northern Territory.
They recently fitted a manual Jack Plate ML-65.
They write….
Hi Wayne, yes the plate turned up last Monday.
It’s on and looks good.
We took it to Manton Dam for a test run on…
Darryl fitted a CMC PT-130 to lift his Yamaha 40
Darryl is in Townsville.
He needed some help to lift the Yammie 40 as he came to shore.
Darryl fitted the PT-130 using the owners manual that comes with each unit.
Its an…
Tim fits PT-35 and answers a few questions about outboard height
Recently went looking for power T&T for my 30 hp yamaha. Age and the back meant the manual tilt was becoming a trial.
Finished up buying the CMC PT35 from Wayne @Caboolture delivered to my door in Newcastle 3 days later…