Author Archive for: Wayne.K
Entries by Wayne Kennedy
PT-35. Special use on Catamaran for HydroSurvey Australia
Hi Wayne,
We purchased a CMC unit from you back in August 2012 to carry our echo sounding equipment between the hulls of our trailer-able Noosa Cat survey vessel, in an attempt to reduce the lifting effort when it was mounted over the side of the vessel as we had to…
Nathan has a CMC PT-130 Trim and Tilt fitted to an older Evinrude 50
Well its all done.
The install went smoothly, just had to muck around a lot to get the motor off the transom, there was a lot of silicone and the motor probably…
John fitted a CMC PT-35 to his 30hp Mercury
Hi Wayne.
I have fitted my CMC unit and I am very happy with it.
I have put 1 switch on the console and another on the outboard motor, that way I can operate…
PL-65 Hydraulic Plate on 250 hp Saltwater Merc with Hydraulic steering
The PL-65 will handle upto to 300 HP no problem.
We have many ski boats fitted with this strong alloy Jack Plate over the last 7 years. Many are used for…
Zig fits a CMC PT-35 to his 30 Merc
Zig has CMC PT-35 with a 30 hp Merc fitted to his tinnie.
He fitted the up down switch to the seat.
That makes it…
Warren adds a PT-35 to his 3.9 Quintrex and Honda 30
There are so many types of boat and motor combinations that the PT-35 will fit.
Common sense is a great guide.
Warren has a Quintrex with quite a…
Keith fits a CMC PT-35 to his little Yamaha and solves a problem
Hi Wayne
Here are some pictures as promised.
Very happy with the CMC PT-35, at 68 finding it a bit of a strain lifting the motor up because…